The Discovery tab shows summary cards for an at-a-glance health check, followed by a grid listing each vehicle's discovery details. To view it:
- Click Vehicle on the left sidebar menu and select Vehicle Manager.
- Click the Discovery tab. (See Switching Accounts for details on how to change the account you are viewing. Turn on View Subaccounts to include vehicles in your subaccounts.)
Summary Cards
| Card | What It Shows |
|---|---|
| Total Vehicles | The number of vehicles with discovery records in the account (and subaccounts, if View Subaccounts is on). The card also shows the total number of devices in the account. |
| Discovery Complete | The number and percentage of vehicles that have finished discovery. |
| Blocked Vehicles | The number and percentage of vehicles that are blocked and need follow-up. See Understanding Vehicle Discovery States. |
| VBUS Disabled | The number and percentage of vehicles whose vehicle bus reporting is disabled. |
The cards use the same account scope as the grid. Click a card to filter the grid to those vehicles.
[TODO: Confirm the final Blocked Vehicles label and card-click behavior after the ADM-6055 release.]
Discovery Grid Columns
| Column | Description |
|---|---|
| Customer | The customer or subcustomer the vehicle belongs to |
| Device Type | The model of the device installed in the vehicle |
| Device ESN | The device's electronic serial number. Click it to open the device's details. |
| VIN | The vehicle identification number, if discovered. Click it to open the vehicle's Vehicle ID report. |
| Make / Model | The vehicle's make and model, if discovered |
| Last Vehicle ID Report | The date and time of the most recent Vehicle ID report from the device |
| VBUS Disabled Indicator | Whether vehicle bus reporting is disabled (see below) |
| Vehicle Discovery State | The vehicle's current discovery state. See Understanding Vehicle Discovery States. |
You can add, remove, and reorder columns. See Customizing Displayed Columns.
VBUS Disabled Indicator
| Indicator | Meaning |
|---|---|
| Yes (red) | VBUS is disabled on the device. Contact Technical Support. |
| No | The device's VBUS is operating normally. |
| Pending Enable | An enable action was submitted and will take effect when the device next checks in. |